This pinning is verified with an old SHARP module with HD44780A00 controller as well as part "LCD 162C" from Reichelt.
| Pin on LocoDev "LCD" header |
Name of net | Pin on Display |
|---|---|---|
| 1 | Vss = 0V | 1 |
| 2 | Vdd = +5V | 2 |
| 3 | V0 (from Pot for contrast) | 3 |
| 4 | RS (register select) | 4 |
| 5 | R/W (data direction, wired to L) | 5 |
| 6 | E (chip enable) | 6 |
| 7 | DB4 | 11 |
| 8 | DB5 | 12 |
| 9 | DB6 | 13 |
| 10 | DB7 | 14 |
Pins 10..14 of LocoDev "LCD" header are not connected,
Pins 7..10 and pins beyond 14 are not connected.
| Autor: Stefan Bormann. | Site hosted by: |
|